The fine grain pattern combined with authentic Walnut colouring lends this porcelain paving tile the look of real timber. Wider than a standard wooden board, it adds a contemporary and stylish feel to exterior and interior designs, and maintains its colour and quality whatever the weather.
Country of origin: Italy
Unlike other porcelain floor tiles, EMPEROR floor tiles have a slightly conical edge – their ‘natural edge’.
This offers two key benefits:
Looks:- Once laid, EMPEROR floor tiles look just like natural stone and are clearly different from ceramic floor tiles with calibrated edges.
Resistance to wear:- Their slanting edges give EMPEROR floor tiles extra stability, making them more resistant to cracking and damage to the edges.
Repeats: The number of repeats of a pattern within a product depends on how lively the pattern is. Our porcelain will vary from 22 repeats in more lively tiles down to 4 in the plainer products
Suitable for indoor and outdoor use
Format: 400mm x 800mm x 20mm thick
Also available in 600mm x 1200mm on special order
Is this product hard wearing?
Our porcelain paving have a hard surface and are easy to clean. Unlike natural stone, these porcelain products do not require sealing or specific cleaning products. Even spots of grease or red wine can be easily cleaned away. They can be cleaned with just water and a soft scrubbing brush.
Are these products slippery?
All Emperor range floor tiles have a slip rating of at least 11 which means the products have been tested in various wet and dry conditions and have proven to be very low risk of slipping.
What is porcelain?
Our porcelain is produced from low lime clays, quartz and felspar (minerals) which are shaped by dry pressing and then fires at very high temperatures. This results in a highly durable material with low level absorption.
Can I use under floor heating?
Yes you can. The heat will transfer through the porcelain, it will take a little longer to heat up but holds the heat well much like stone.