Our porcelain paving have a hard surface and are easy to clean. Unlike natural stone, these porcelain products do not require sealing or specific cleaning products. Even spots of grease or red wine can be easily cleaned away. They can be cleaned with just water and a soft scrubbing brush.
Metropolitan – Emperor Urban
The Urban range has rectified edges which enable minimal grout lines giving your space a very clean, symmetrical and even look
Suitable for indoor and outdoor use
Repeats: The number of repeats of a pattern within a product depends on how lively the pattern is. Our porcelain will vary from 22 repeats in more lively tiles down to 4 in the plainer products
Format: 800mm x 800mm x 20mm thick
Our porcelain paving range is weather, frost and acid resistant.
All Emperor range floor tiles have a slip safety rating of at least 11 which means the products have been tested in various wet and dry conditions and have proven to be very low risk of slipping.
Our porcelain paving is ideal for use on patios, roof terraces and balconies, as well as indoors.
The Emperor range can be laid on to:
- permeable mortar
- with recommended adhesive on concrete floor
- bedding aggregate (no cement)
Our porcelain is produced from low lime clays, quartz and felspar (minerals) which are shaped by dry pressing and then fired at very high temperatures. This results in a highly durable material with a low level absorption (Spillages don’t soak in).
Yes you can. The heat will transfer through the porcelain, it will take a little longer to heat up but holds the heat well much like stone.
A tile with rectified edges means it has been cut to size after the firing process so the dimension of each tile should be the same, allowing for a tighter joint between the tiles. Non-rectified tiles are cut to size prior to firing and shrinkage during firing means that each tile can have slight variation in size so a wider grout joint is required.
Price per Sq metre
£70.00 ex VAT
£84.00 inc VAT